Southern Stud Weld  


Arc Weld Studs - No Thread



STUD DIMENSIONS
D MIN L ** FD FH
3/16 3/4 * .281 .093
1/4 3/4 * .359 .109
5/16 3/4 * .437 .109
3/8 3/4 * .500 .125
7/16 3/4 * .578 .140
1/2 7/8 .627 .156
5/8 1" .796 .187
3/4 1-1/8 .937 .250
1" 1-1/2 1.312 .375
* Ferrules used with Studs 3/4" long are special "low profile" ferrules

** Knock-Off studs are available if shorter lengths are required

No thread simply do not have any threads. They are used for stops, handles, location pins etc. These studs are used to anchor refractory to water walls in the power generation industry and to facilitate heat transfer in many applications.

Special secondary operations such as grooving and cross-drilling expand the uses for these fasteners.





MATERIAL LOW CARBON STEEL
C - 0.23% max.       P - 0.04% max.
Mn - 0.90% max.     S - 0.05% max.		 STAINLESS STEEL
AISI Grade - 302/304 std.
Other grades available upon request
MECHANICAL PROPERTIES Tensile                         60,000 psi (min.)
Yield                             50,000 psi (min.)
Elongation                   20% (in 2 inches)		 Values for various grades available upon request.
PLATING Plating is not standard. Cadmium
Copper, Nickel and Zinc available
upon customer request.		 Does not apply to Stainless